Symbol Phaser P460, Справочное руководство

Страница: 23 / 147

3-4
Phaser Series Scanner Product Reference Guide
Confirm file erase
<EN>=Y <BK>=N
Figure 3-8. Data Erasure Confirmation
Press <ENTER> on this screen to erase the data; press <BK> to retain the data.
POS Application
Whenever the scanner detects that a communication cable has been inserted, it switches to
the POS application. In POS mode, the scanner can transmit bar codes and optional
quantities to the POS host. The POS screen appears as follows:
SCAN: _______________
_____________________
Figure 3-9. POS Application Screen
Scanned bar codes automatically transmit to the host. Keyed bar codes transmit once you
press the <ENTER> key. To enter a quantity, press the * key prior to scanning or keying any
bar code data. Once you press the * key, the following screen appears:
QTY: _____
Figure 3-10. POS Quantity Screen
Key in a quantity followed by the <ENTER> key. The SKU entry screen reappears. The
scanner sends the SKU to the host the keyed-in amount of times. For instance, if you type in
a quantity of 6, the scanner sends that SKU to the host six times as if the SKU were scanned
six times.
System Menu
The system menu contains utilities to allow the user to set up the scanner. To access the
System Menu, press the <FN>* key combination to reset the scanner, and then <FN><BK>
within the first 10 seconds after the power up beep (while the
Banner Screen on page 3-1 is
still shown). The scanner displays:
Phaser P460 Scanner
0. System Setup
Figure 3-11. Setup Screen