Symbol PDT 8100 Series, Руководство по продукции

Страница: 88 / 402

2-34
PDT 8100 Series with Windows Mobile 2003 Software for Pocket PCs Product Reference Guide
Scan LED Indicator
See Parts of the Terminal on page 1-4 for the location of the Scan LED on the terminal.
Resetting The Terminal
If the terminal stops responding to input from buttons or the screen, reset it by performing
a soft or hard reset (warm or cold boot).
Performing a Soft Reset
A soft reset (warm boot) restarts the terminal and saves all stored records and entries. To
perform a soft reset press and hold the Power button (for approximately five seconds) and
release it as soon as the screen changes and the terminal begins to reboot.
Caution
Files that remain open during a soft reset may not be retained.
As an alternate method to perform a soft reset when the terminal is on press the key
combinations in
Table 2-7 .
Table 2-6. Scan LED Indicator
LED Status Indication
Off Not scanning.
Solid Red Laser enabled. Scanning in process.
Solid Green Successful decode.
Table 2-7. Soft Reset Key Functions
Keyboard Keys
28-key Press Bac Down Arrow + Function
37-key Press Bac Alpha + Function
47-key Press Bac End + Function