Symbol PDT 7200 Series, Справочное руководство

Страница: 25 / 142

1-7
Getting Started
Calibrating the Screen
The first time you start your PDT 7200 (and whenever the terminal is cold-booted) the
calibration screen appears. This section describes how to calibrate your PDT 7200 so the
cursor on the touch screen aligns with the tip of your stylus.
To calibrate your PDT 7200:
1. Use your fingertip or a plastic stylus and tap the center of each target that appears
on the screen.
Figure 1-1. Tapping Target
2. Tap the screen to continue booting Windows
®
CE.
3. The Symbol Shell and Launcher programs are deployed.
Tap the center of the target with the
stylus. Repeat as the target moves
around the screen.