4
M i n i S c a n F a m i l y
o f S c a n n e r s
-
Female DB9 in straight connector to
Synapse Adapter Cable (6 ft. straight),
p/n 25-58921-01
-
Photo sensor trigger and cable,
p/n 25-13176-01
•
other
-
Fixed mount stand,
p/n 20-60136-01
-
Software Developer's Kit,
p/n SW-60371-01.
Connecting the MiniScan
MinScan can be triggered either by a software
trigger command, or by an external switch. If the
MiniScan scanner came without a host cable, or if
you are constructing an external triggering switch,
consult the
MiniScan Integration Guide.
To connect the MiniScan:
1. Plug the 9-pin D-connector with the end
marked “TO SCANNER” into the MiniScan
scanner.
2. If using an external switch and applicable
host cable, plug trigger cable into the female
stereo connector on the flying lead of the
9-pin D-connector.
