Symbol DS 6608, Руководство по продукции

Страница: 98 / 396

DS 6608 Product Reference Guide 7-16
Software Handshaking
This parameter offers control of the data transmission process in addition to, or instead of, that offered by hardware handshaking.
There are five options.
If Software Handshaking and Hardware Handshaking are both enabled, Hardware Handshaking takes precedence.
• None : When this option is selected, data is transmitted immediately. No response is expected from host.
• ACK/NAK : When this option is selected, after transmitting data, the digital scanner expects either an ACK or NAK response
from the host. When a NAK is received, the digital scanner transmits the same data again and waits for either an ACK or
NAK. After three unsuccessful attempts to send data when NAKs are received, the digital scanner issues an error indication
and discards the data.
The digital scanner waits up to the programmable Host Serial Response Time-out to receive an ACK or NAK. If the digital
scanner does not get a response in this time, it issues an error indication and discards the data. There are no retries when
a time-out occurs.
• ENQ : hen this option is selected, the digital scanner waits for an ENQ character from the host before transmitting data. If
an ENQ is not received within the Host Serial Response Time-out, the digital scanner issues an error indication and discards
the data. The host must transmit an ENQ character at least every Host Serial Response Time-out to prevent transmission
errors.
• ACK/NAK with ENQ : This combines the two previous options. For re-transmissions of data, due to a NAK from the host,
an additional ENQ is not required.
• XON/XOFF : An XOFF character turns the digital scanner transmission off until the digital scanner receives an XON character.
There are two situations for XON/XOFF:
• XOFF is received before the digital scanner has data to send. When the digital scanner has data to send, it waits up to
Host Serial Response Time-out for an XON character before transmission. If the XON is not received within this time, the
digital scanner issues an error indication and discards the data.
• XOFF is received during a transmission. Data transmission then stops after sending the current byte. When the digital
scanner receives an XON character, it sends the rest of the data message. The digital scanner waits up to 30 seconds
for the XON.
*
None
ACK/NAK
ENQ