AP-5131 Access Point:
Installation Guide
28
inactive connections, while others do not. In either case, enabling Keep-Alive maintains
the WAN connection, even when there is no traffic. If the ISP drops the connection after
the idle time, the AP-5131 automatically reestablishes the connection to the ISP.
b. Specify a
Username
entered when connecting to the ISP. When the Internet session
begins, the ISP authenticates the username.
c. Specify a
Password
entered when connecting to the ISP. When the Internet session
starts, the ISP authenticates the password.
7.
Click the
LAN
tab to set a minimum set of parameters to use the AP-5131 LAN interface.
a. Select the
Enable LAN Interface
checkbox to forward data traffic over the AP-5131
LAN connection. The LAN connection is enabled by default.
b. Use the
This Interface
drop-down menu to specify how network address information
is defined over the AP-5131’s LAN connection. Select
DHCP Client
if the larger
corporate network uses DHCP. DHCP is a protocol that includes mechanisms for IP
address allocation and delivery of host-specific configuration parameters from a DHCP
server to a host. Some of these parameters are IP address, network mask, and gateway.
Select
DHCP Server
to use the AP-5131 as a DHCP server over the LAN connection.
c. Enter the network-assigned
IP Address
of the AP-5131.
d. The
Subnet Mask
defines the size of the subnet. The first two sets of numbers specify
the network domain, the next set specifies the subset of hosts within a larger network.
These values help divide a network into subnetworks and simplify routing and data
transmission.
e. Enter a
Default Gateway
to
define the IP address of a router the AP-5131 uses on the
Ethernet as its default gateway.
f. Enter the
Primary DNS Server
IP address.
g. If using DHCP Server, use the
Address Assignment Range
parameter to specify a
range of IP address reserved for mapping clients to IP addresses. If a manually (static)
mapped IP address is within the IP address range specified, that IP address could still be
assigned to another client. To avoid this, ensure all statically mapped IP addresses are
outside of the IP address range assigned to the DHCP server.
NOTE
For additional AP-5131 WAN and LAN port configuration options, as well
as radio, WLAN and Quality of Service (QoS) options, refer to the
AP-5131
Product Reference Guide.
The guide is on the CD-ROM shipped with the
AP-5131, or can be found at
(
http://www.symbol.com/services/downloads.html
).
Содержание AP-5131
