Symantec netbackup 5030 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 69

Symantec netbackup 5030 Скачать руководство пользователя страница 35

Table 5-1

Appliance control panel element descriptions (continued)

Function

Description

Label

The System Status LED indicates the health of the Appliance. The
LED is green when the unit does not report a problem. The LED is
amber when the unit reports a problem.

provides

additional information about the system status LED.

Note:

Whenever the system status LED indicates that appliance

operations are not normal, access the Data Collect logs
immediately to troubleshoot the problem. You can use the
NetBackup Appliance Web Console to access the Data Collect logs.

System status LED

10

Table 5-2

System Status LED State Indications

Description

Criticality

State

Color

System is turned off (AC or DC).

Not ready

System is
off

Off

Indicates that the System is running and its status is healthy.
AC power is present and the system does not show any errors.

Ok

Constant
on

Green

A redundancy component has failed and the system is in
operation.

Non-critical threshold crossed:

■

Temperature (including HSBP temp)

■

Voltage

■

Input power to power supply

■

Output current for main power rail from power supply

■

Unable to use all of the installed memory (one or more
DIMM has failed or is disabled but functional memory
remains available)

Battery failure.

BMC activity.

Disk drive marked offline during AC power cycle.

Degraded - system operates
in a degraded state although
still functional, or system
operates in a redundant
state but with an impending
failure warning

Note:

Access the Data

Collect logs in the
NetBackup Appliance Web
Console to troubleshoot the
problem.

1-Hz blink

Green

35

Understanding the LED status indicators

About the appliance control panel

«
...
33
34
35
36
37
...
»

Содержание netbackup 5030






































































Отзывы:

Нет отзывов