Symantec Backup Exec 3600 R3, Быстрый старт

Страница: 17 / 22

Do the following in the order listed:
■
In DNS Settings , add the DNS IP
address, and then select an eth port to
which you want to bind the address.
■
Click Add .
■
If you want to use a proxy server, select
Enable Proxy , and then enter the
pertinent proxy server information.
Note:
If your proxy server supports
Secure Socket Layer tunneling, select
Enable SSL Tunneling .
■
Click Next .
■
Continue with step 8.
If you want to manually configure the
connection to a DNS server
8
When the DNS summary page reports a successful configuration, click Next .
9
On the Security page, review the information. Then enter an administrator
account password and a password to use as the new deduplication logon
account password. You use the deduplication logon account password to
access the deduplication disk storage device.
The administrator password can be seven or more characters in length, and
it must include a specific combination of characters, with minimum requirements
for acceptable passwords.
A password with seven characters must include all of the following requirements,
while a password with more than seven characters must include at least three
of the following requirements:
■
One uppercase letter
■
One lowercase letter
■
One number (0-9)
■
One of the following special characters: @ # $ % ^ & ! * ( ) { } [ ]
Note: Use only the special characters listed. Be aware that using other
special characters in non-English languages may be considered as invalid
characters.
10 Click Next .
11 Click OK when you are prompted to proceed.
12 After successfully updating the passwords, click Next .
17 Backup Exec Appliance Quick Start Guide
Configuring the Backup Exec Appliance