6
Lower the chassis onto the extended rails.
7
Be sure that the three locking pins on the sides of the chassis fit into the three
slots in the extended rails.
Note:
The following drawings show an empty chassis. Your appliance is fully
loaded, with the chassis cover installed, when it arrives from the factory. The
following drawings show a generic chassis. You can use these instructions
regardless of the height of your appliance.
8
Secure the fasteners over the front hole, on each side of the appliance.
9
Press the release tab on the extended rail (#1 on the following picture).
10
Push the chassis into the rack until it snaps into place (#2 on the following
picture).
Configuration
Mounting the appliance in the rack
20
