Mounting the appliance in the rack
This section describes the rack mounting of the appliance. Be sure to use standard
safety and work procedures.
Standard mounting rails are included in the shipping box to accommodate Standard
Enterprise square hole 19” racks. If your racks require different rails, contact
Symantec Technical Support.
Note:
Symantec recommends mounting appliances in the lower portion of a rack
to help lower the center of gravity.
See “Configuring the appliance” on page 17.
To mount the appliance in the rack
1
Install the slide rail to the rack.
2
Place the top fastener into the rail hole.
3
Snap the edge of the fastener down.
4
Insert the bottom fastener and make sure that it is secure.
5
Fully extend the rails forward.
19
Configuration
Mounting the appliance in the rack
