Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 - FOR DELL SERVERS V1.0, Руководство пользователя

Страница: 26 / 47

Table 4-2
Lifecycle Controller tasks for Dell servers
Description Task
You can boot your server to the pre-OS ISO on the
deployment share without using PXE.
See “Boot to Dell ISO on network task” on page 41.
Boot to Dell ISO on network
You can boot your server to the pre-OS ISO that is on
the Vflash of the Lifecycle Controller.
See “Boot to ISO on Vflash task” on page 40.
Boot To ISO On Vflash
You can close the access to the drivers that are
embedded on the Lifecycle Controller.
See “Close access to drivers task” on page 42.
See “Open access to drivers task type” on page 39.
Close Access To Drivers
You can copy the WinPE ISO for Dell servers to the
Vflash on the Lifecycle Controller of your server.
See “Copy Dell WinPE ISO to Vflash task type”
on page 40.
Copy Dell WinPE ISO To Vflash
You can open the access to the drivers that are
embedded on the Lifecycle Controller.
See “Open access to drivers task type” on page 39.
See “Close access to drivers task” on page 42.
Open Access To Drivers
Before you perform a scripted OS installation, you can
copy the drivers from the DRAC controller to the RAM
drive. This action resolves the issue that Windows does
not boot correctly if the drivers are present.
See “Copy Windows 2008 SOI drivers task” on page 41.
Windows 2008 SOI Driver Copy
Creating a deployment task for a Dell server
You can run the tasks that configure different types of Dell servers. You can also
run the tasks that manage the Lifecycle Controller on your servers.
See “About deployment tasks and jobs for Dell servers” on page 23.
After a deployment task is created, it is listed under the Jobs and Tasks >
Deployment and Migration > Dell Servers folder. Click any task to view the
properties of that task. You can drag and drop tasks to other folders and manually
create folders.
Creating tasks and jobs on Dell servers
Creating a deployment task for a Dell server
26