-14-
Wifi camera installation and dismantling methods
Wifi camera dismantling procedures:
Figure (1)
Figure (2)
Figure (1)
Figure (2)
1. Remove the 3-line plug into the camera connection interface of the
main body according to Figure (1).
2. Use strength to press against the safety catch of the main body and
at the same time, pull the camera backward according to Figure (2).
Wifi camera installation procedures:
- Transformers used with the toy are to be regularly examined for
damage to the cord,plug,enclosure and other parts,and that,in the
event of such damage,the toys must not be used with this transformer
until the damage has been repaired.
- Warning! The toy is to be assembled by an adult.
- Rechargeable batteries are to be removed from the toy before being
charged .
- Rechargeable batteries are only to be charged under adult supervision .
- Exhausted batteries are to be removed from the toy.
- After the battery cover of remote controller is opened by the tool
(screwdriver), 4 AA batteries are correctly installed according to the
positive and negative electrode. Then, the battery cover is closed. Finally,
the screwdriver is used to screw down the battery cover. The aircraft should
be connected with 500mAh and 3.7V lithium battery after the battery cover
is opened manually. Then, the battery cover is closed manually.
