SYMA X5SW-V3 Скачать руководство пользователя страница 14

-13-

2. Disconnect the connection joint of the 
    battery from the connection interface of 
    the power supply.

3. Connect the power supply line of the battery 
    with USB, and connect the USB interface 
    with the computer’s connection port (During 
    charging, the light indicator will light up; and 
    the light indicator will go off when it is fully 
    charged. The completion time for charging 
    the battery is less than 130 minutes).

4. After changing the batteries, firmly secure 
    the battery cover again.

Precautions as follows during charging of battery:

- Avoid placing the active batteries in places with direct exposure, 
  sunlight and high temperatures. For example, naked light or electrical 
  equipment installations; otherwise it may cause damages or 
  explosions.
- Avoid immersing the batteries in the water. The batteries shall be 
  stored in a cool and dry place.
- Avoid dismantling the batteries.
- During the charging of battery, avoid leaving the charging place.
- Risk of explosion if battery is replaced by an incorrect type.Dispose 
  of used batteries according to the instructions.
- The following instructions were NOT marked.
- Rechargeable batteries are to be removed from the toy before being 
  charged.Rechargeable batteries are only to be charged under adult 
  supervision.
- Exhausted batteries are to be removed from the toy.

The charging time is less than 130 minutes; In hover flight 
conditions longer than 7.5 minutes!

Содержание X5SW-V3





















Отзывы: