Sym CRUiSYM A, Руководство пользователя

Страница: 11 / 38

11
○
d
Odometer
This odometer shows the total distance in kilometers the scooter has been ridden.
It cannot be reset.
○
e
Multifunction Display
When the ignition switch is turned on, battery voltage will display for approximately 10 seconds.
Then the below display mode can be shifted circularly by pushing the S button.
Clock
→
Battery voltage
→
Clock
…
Push M button to switch the below display mode:
Odometer
→
Trip meter
→
Oil meter
→
Odometer
…
Clock
This clock displays only 24-hour mode.
To set the clock, do the below steps:

Turn the ignition switch on and wait for approximately 10 seconds until the clock displays.

Push the M button for more than 2 seconds, the hour display starts blinking.
Push the S button to adjust the hours.

Push the M button. The hour display stops blinking, and the minute display starts blinking.
Push the S button to adjust the tens place in the minute display.
Push the M button. The tens place stops blinking, and the unit display starts blinking.
Push the S button to adjust the units place in the minute display.

Push M button to finish clock setting.
NOTE :

The data is maintained in the combination instrument even when the battery is disconnected.

When the figures come to 99999, they will return to 0, and the odometer starts working again.

This odometer only shows in kilometers.
NOTE :

When the battery is disconnected, the clock is reset to 12:00 and starts working again when the battery
is reconnected.

If the clock is idled about 30 seconds while setting, it will exit setting mode automatically and starts
working again.

If the ignition switch is turned off while setting the clock, the clock will exit setting mode when the
ignition switch is turned on again.

The clock works normally by the backup power even the ignition switch is turned off.