30
▼
Setting the Time
The clock on the phone answering system starts when power is supplied to the base.
Follow these steps to set the clock to the correct time.
1) Press
MENU/CLOCK
. The system announces
“Time” and the current time. The message
counter displays the current numbers ([
]
through [
]) indicating the day of the week.
2) Press or
/VOLUME/SELECT
until the
correct day is announced. The numbers [
]
through [
] are displayed on the base.
3) Press
SET
to select the day.
4) Press or
/VOLUME/SELECT
until you hear the correct hour setting. The
numbers [
] through [
] are displayed on the base as each hour is announced.
5) Press
SET
to select the hour.
6) Press or
/VOLUME/SELECT
until you hear the correct minute setting. The
numbers [
] through [
] are displayed on the base as each minute is
announced.
7) Press
SET
to select the minute.
8) Press or
/VOLUME/SELECT
until you hear the correct AM or PM setting. The
message counter displays [
]or [
].
9) Press
SET
to select the AM/PM.
You hear a confirmation tone. The phone announces “Time”, and the time and day
for your review.
NOTES:
• Normally the idle time for the menu mode is 10 seconds before the system returns to
standby. However for setting the time, the idle time is extended to two minutes.
• Press and hold
or
/VOLUME/SELECT
to quickly scroll through numbers on the
display.
UP045DH(ST88246) OM ENG 3/31/04 3:49 PM Page 30
Содержание ST88246
Страница 2: ......
