3
Fig. A
Fig. B
Step 3: Attach the LEFT SIDE PANEL (G) to the LEFT FRONT PANEL (E) with 2 KD
SCREWS. Attach the RIGHT SIDE PANEL (H) to the RIGHT FRONT PANEL (F) with 2 KD
SCREWS. See fig. C
Fig. C
Step 4: Attach the LEFT (E, G) and RIGHT (F, H) SIDE PANELS to the BASE (B) using 4
KD SCREWS (2 screws on each side). See Fig. D
Fig. D
Step 5: Place the UPPER FRONT PANEL (C) over both FRONT PANELS (E and F) and
lock in place to the SIDE PANELS (G and H) with 2 KD SCREWS as shown in Fig. E
Fig. E
Step 6: Attach the MID-FRONT PANEL (D) to the UPPER FRONT PANEL (C) with 4 KD
SCREWS (2 screws each side). See Fig. F
Fig. F
Step 7: Install the TOP PANEL (A) to the unit as shown and attach with 4 KD SCREWS.
See Fig. G and H
Fig. G
Fig. H
Step 8: Tighten all SCREWS.
FIREPLACE INSERT INSTALLATION
The fireplace insert can be installed after the mantle has been fully assembled.
WARNING:
Make sure the fireplace insert controls are in the OFF position and the
unit is NOT plugged in.
Step 1: Place the INSERT on the floor, directly in front of the MANTLE. (The front of
both the mantle and insert should be facing the same direction.)