12
Connections
Connection to an Audio System
• Before changing the connections, all devices should be turned off.
• Refer to each owner’s manual for further information on other devices.
L
R
DVD/VCR
AUDIO OUT
DVD
AUDIO
OUT
L
R
or
Stereo system
COAXIAL
DVD
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
Method
1
Analog audio
input jacks
Digital audio
input jack
AUDIO OUT
DIGITAL
AUDIO OUT
Method
2
Audio cable
(supplied)
Coaxial Digital
Audio cable
(not supplied)
Note
• If you connect this unit to a receiver with a Dolby
Digital decoder and set “Dolby Digital” to “Stream”
for the “Digital Out” setting in the SETUP menu.
(Refer to pages
30-31
.)
• If output is DTS encoded audio, connect to a DTS
decoder and set “DTS” to “ON” for the “Digital
Out” setting in the SETUP menu. (Refer to pages
30-31
.)
• A Dolby Digital
5.1
channel surround format can-
not be recorded as digital sound by an MD or DAT
deck.
• Unless connected to a receiver with a Dolby Digital
decoder or a DTS decoder, set “Dolby Digital” to
“PCM” and “DTS” to “OFF” for the “Digital Out”
setting in the SETUP menu. Playing a DVD using
incorrect settings may generate noise distortion and
may also damage the speakers. (Refer to pages
30-
31
.)
• Set “Dolby Digital” to “PCM” for the “Digital Out”
setting in the SETUP menu for connecting to an
MD deck or DAT deck. (Refer to pages
30-31
.)
• By hooking this unit up to a receiver with a Multi-
channel Dolby Digital decoder, you can enjoy high-
quality Dolby Digital
5.1
channel surround sound as
heard in movie theaters.
Receiver with Dolby
Digital Decoder
This unit
(VCR/DVD Sound)
(DVD Sound Only)
(DVD Audio only)
