Sylvania SRCD1081BT, Инструкция по эксплуатации, Страница: 12 / 16

• If the remote control unit is operated near other appliances which generate
infrared rays, or if other remote control devices using infrared rays are used near
the unit, it may operate incorrectly. Conversely, the other appliances may
operate incorrectly.
TO ACTIVATE THE REMOTE CONRTOL
The remote control comes with a cell battery already
installed. To activate the battery, remove the transparent
tab at the bottom of the remote control. The remote
control is now ready to use.
BATTERY REPLACEMENT
If the distance required between the remote control unit and main unit decreases,
the battery is exhausted. In this case, please replace the battery with a new one.
To Replace With a New Battery
1. Remove the battery compartment cover as per the
illustration on the right.
2. Observe the correct polarity and install a 3Vdc lithium
battery (CR2025).
3. Close the cover.
BATTERY PRECAUTIONS
• Be sure to insert the battery with correct po and negative - polarities.
• Refer to the precautions on the battery labels.
• When the remote control unit is not to be used for long periods of time (more
than a month), remove the battery from the remote control unit to prevent it from
leaking. If it leaks, carefully wipe away the liquid inside the battery compartment
and replace the battery with a new one.
• Do not heat or disassemble batteries and never dispose of old batteries by
throwing them into a fire.
10