background image

- 25 -

EN

9I03

CABINET CLEANING

Wipe the front panel and other exterior surfaces of
the TV/VCR with a soft cloth immersed in luke-
warm water and wrung dry.

Never use a solvent or alcohol. Do not spray insec-
ticide liquid near the TV/VCR. Such chemicals
may cause damage and discoloration to the
exposed surfaces.

AUTO HEAD CLEANING

Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.

Playback picture may become blurred or interrupt-
ed while the TV program reception is clear. Dirt
accumulated on the video heads after long periods
of use, or the usage of rental or worn tapes can
cause this problem.
If a streaky or snowy picture appears during play-

MAINTENANCE

back, the video heads in your TV/VCR may need
to be cleaned.

1. Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the prob-

lem, please call our help line at 1-800-488-1222, to
locate an Authorized Service Center.

NOTES:

Remember to read the instructions included with
the video head cleaner before use.

Clean video heads only when problems occur.

SERVICING

Should your TV/VCR become inoperative, do not
try to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord, and please call our help line at 1-800-
488-1222, to locate an Authorized Service Center.

ON SCREEN DISPLAY

To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote
control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:

WHEN THE CLOSED CAPTION MODE IS OFF:

Counter mode: After 5 seconds, only
the counter remains. To clear it, press
the DISPLAY button.

Clock mode: After 5 seconds, only
the clock and the channel number
remain. To clear them, press the DIS-
PLAY button.

WHEN THE CLOSED CAPTION MODE IS ON:

The On Screen Display disappears after 5 seconds.

This is true even if the MUTE button is pressed, or the
PAUSE/STILL button is pressed while recording.

OFF mode

Clock/Counter mode

SPECIAL FEATURES

REAL TIME TAPE COUNTER

This shows the elapsed recording or playback time in
hours, minutes, and seconds. (The displayed time
will not change on a blank tape or blank portions on
the tape.)The “–” indication will appear when the
tape has rewound further than “0:00:00” on the tape
counter.

AUTO REWIND-EJECT

When the end of a tape is reached during record-
ing, playback, or fast-forward, the tape will auto-
matically rewind to the beginning. After rewinding
finishes, the TV/VCR will eject the tape and turn
itself to off.

This function is operative when Repeat Play is set
to the [OFF] position.

The tape will not auto-rewind during timer record-
ing or One Touch Recording.

STOP

5:40 PM

CH2

SP

COUNT 0:12:34

COUNT  0:12:34

5:40PM

CH2

<Counter mode>

<Off mode>

<Clock mode>

Press 
once

Press 
once

Press once

T5508UJ(EN).QX33  04.4.12  10:04 AM  Page 25

Содержание SRC2213E

































Отзывы: