3
fig. 3
Step 4: Connect the FRONT BASE [B] and BACK BASE [E] with 3 LONG KD SCREWS [P]
and 3 NUTS [I] as shown in Fig. 4
fig. 4
Step 5: Attach the FRONT PANELS [F] to the SIDE PANELS [D] with 6 LONG KD
SCREWS [P]. See Fig. 5.
fig. 5
Step 6: Attach the LEFT SIDE [D, F and G] and RIGHT SIDE [D, F and H] to the BACK
BASE [E] using 4 LONG KD SCREWS [P]. See Fig. 6
fig. 6
Step 7: Mount the UPPER FRONT [C] between the top of FRONT PANELS [F] with 4
LONG KD SCREWS [P]. See Fig. 7
fig. 7
Step 8: Install the TOP [A] to the unit with 6 LONG KD SCREWS [P] as shown
in Fig. 8.
fig. 8
Step 9: Tighten all SCREWS.
FIREPLACE INSERT INSTALLATION:
The fireplace insert can be installed after the mantel has been fully assembled.
WARNING: mAKE SURE THE FIREPLACE INSERT CONTROLS ARE IN THE OFF
POSITION AND THE UNIT IS NOT PLUGGED IN.
Step 1: Place the INSERT in Front of the mantel on the floor. Carefully lift the INSERT
into the mantel until the trim is against to MANTEL. See Fig. 9