2
ASSEMBLY INSTRUCTIONS
PARTS LIST
qTY
Fireplace insert .....................................................................................................................1
A) Top panel .........................................................................................................................1
B) Front Base .......................................................................................................................1
C) Upper Front .....................................................................................................................1
D) Side panels ......................................................................................................................2
E) Back Base ........................................................................................................................1
F) Front panels ....................................................................................................................2
G) Left Small panel ..............................................................................................................1
H) Right Small panel ...........................................................................................................1
I) Nuts ..................................................................................................................................3
J) Long KD screws ............................................................................................................51
K) Connectors ......................................................................................................................2
O) Medium Brackets ...........................................................................................................4
P) Medium KD Screws .......................................................................................................4
Q) Plastic Connector..........................................................................................................10
R) WALL ANCHOR SAFETY CABLE
Wall Anchor ...........................................................................................................................1
Screw for wall anchor ..........................................................................................................1
Screw for mantel ...................................................................................................................1
Safety cable ...........................................................................................................................1
S) SELF REPAIR SET
Touch-up repair paint (bottle)
Small L bracket ......................................................................................................................8
Screws for Small L bracket ............................................................................................... 32
Plastic Connector ..................................................................................................................1
KD Screws ..............................................................................................................................3
KD Nuts ..................................................................................................................................3
Tools required: Phillips Head Screwdriver, Electric Drill, Drill bit 5/16 inches
(8mm), Hammer
CAUTION: PLACE A PIECE OF CARDBOARD OR PROTECTIVE SHEET ON THE
FLOOR IN ORDER TO AVOID SCRATCHING THE DECORATIVE SURFACE OF
YOUR mANTLE DURING ASSEmBLY. PLEASE DO NOT FULLY TIGHTEN THE KD
SCREWS UNTIL ALL PANELS ARE ASSEmBLED.
Step 1: Attach the CONNECTORS [K] to the SIDE PANELS [D] with 4 LONG KD SCREWS
[J]. See Fig. 1
fig. 1
Step 2: Attach all PLASTIC CONNECTORS [Q] to the parts [D, G and H] as shown in Fig.
2 (2 LONG KD SCREWS (J) for each PLASTIC CONNECTOR (Q)
fig. 2
NOTE: If the KD SCREWS do not fit during assembly, loosen the 2 screws to
adjust the PLASTIC CONNECTOR until the parts/KD SCREWS can be installed.
Step 3: Attach the LEFT SMALL [G] and RIGHT SMALL [H] to the FRONT PANELS [F] with
4 LONG KD SCREWS [P]. See Fig. 3