This micro USB port is for uploading photos from USB drive only, it is not for
connecting computer. Photos in the USB drive can’t be displayed directly in
the frame, you have to upload/import photos from USB drive to the frame first.
You can export/copy photos from the frame to USB drive. Remarks: The usb
flash drive is recognized as “SD card” when it was inserted in the frame.
Note: Need a OTG cable to connect this USB to this unit. This OTG cable is
not included.
3
.
USB
2
.
RESET
Use a needle or paper clip to reset unit.
1
.
POWER
Use power adapter to power on the frame.
When it is on, press and hold power button for approximately 3 seconds to
access reboot or power off menu. Short press on power button will turn
off/onscreen (but leave the photo frame in on position).
Power off: To avoid any possible damage to the frame, please do not
unplug the power adapter from the frame directly, please always press
the power button for 2 seconds and tap “Power off” .
1
2
3
4
5
1
