2
PARTS LIST
Fireplace .......................................................................................................................................................1
A) Mounting screws .................................................................................................................................2
B) Wall Anchors .........................................................................................................................................2
TOOLS REQUIRED: LEVEL, ELECTRIC DRILL, DRILL BITS (5/16 INCh (8MM)), PhILLIPS hEAD SCREWDRIVER,
hAMMER, SAFETY gOggLES AND gLOVES
INSTALLATION
Step 1: Select the wall location where you want to hang your electric fireplace heater.
Draw a horizontal line using level and mark 2 drill holes as shown in Fig. A for the
2 mounting screws. The 2 screws holes shall be spaced 260mm.
NOTE:
The 2 holes are for mounting of fireplace and it shall be level so that the fireplace
can be mounted properly and leveled.
Fig. A
Step 2: Drill 2 holes 5/16in (8mm) on the marked locations. For holes that do not hit stud,
use the supplied wall anchor. Install the wall anchors into the holes and gently tap
them into place with a hammer until the flange of the wall anchor is flush with the
wall surface. See Fig. B
Fig. B
Step 3: Secure the 2 mounting screws into the wall anchor as Fig. C.
Fig. C
Step 4: Mount the fireplace on wall by the keyhole slots of metal bracket at the back of
fireplace. See Fig. D
Fig. D
Step 5: Make sure that the 2 mounting screws are completely engaged into the metal
bracket at the back of the fireplace. See Fig. E
Fig. E