Step 6:
Turn ON AC the power supply (circuit breaker) to emergency light unit. The green LED will light. To test unit,
gently depress and hold the green LED button and the lens housing will automatically extend outward to
the open position and the lamps will turn on. Release the green LED button and the unit will automatically
retract and the lamps will turn off. Replace front cover plate via metal screws and screw cap covers. Green
LED charge indicator will stay on as an indication that AC power is energizing the fixture and the internal
rechargeable battery is charging.
MAINTENANCE
Equipment should be tested regularly in accordance with local codes.
NOTE: Servicing of parts should be performed by qualified service personnel. For replacement lamps
or batteries see fixture labels.
Painting or wallpapering front cover plate:
1. When painting cover plate, be sure to first use a primer coat, prior to final color matching.
2. After each coat of paint, ENSURE FREE MOVEMENT OF THE LENS DOOR by opening and closing it several
times until paint is completely dry. When paint is completely dry, test unit operation using the push to test
led/ac test switch located on central battery unit . If door sticks, safely trim residual paint from around lens
door with utility knife or similar tool and test unit operation again.
3. When wallpapering the cover plate, be sure to trim around the edges of the lens door to ENSURE FREE
MOVEMENT. After wallpaper is installed, test the unit operation via the push to test GREEN led button.
OPERATION
To test existing unit when fully installed in wall or ceiling, depress and hold led/ac test switch located on
central battery unit . Lamp housing will automatically extend outward and lamps will illuminate. After test,
release the led/ac test switch located on central battery unit to return housing to original position.
Imported by:
OSRAM SYLVANIA Inc.
54 Cherry Hill
Danvers, MA 01923
Made in China
SYLVANIA is a registered trademark of OSRAM SYLVANIA Inc.
Copyright © 2011 OSRAM SYLVANIA Inc. 04/20
E13885
NOTICE
NOTICE
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-LIGHTBULB (1-800-544-4828)
This SC Series Emergency Light is furnished with a sophisticated low voltage battery dropout circuit to protect the
battery from over discharge after the useful output has been reached. Allow 24 hour recharge time after installation
or power failure for full load testing.
DQ3-144-003A
