16
EN
W
ATCHING TV
Switching Audio Mode
This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.
TV
While receiving an MTS broadcast, press
[AUDIO ]
repeatedly to cycle through the available audio channel.
MAIN
SAP
MONO
MAIN
: Outputs main-audio
SAP
: Outputs second audio program
MONO
: Outputs mono-audio
DTV
1
Press
[AUDIO ]
to display the currently selected
language and the number of available languages.
A Day of Memories
75
TV-PG ENGLISH
1/2
25-03
KABC
2
Press
[AUDIO ]
repeatedly to cycle through the
available audio languages.
• Available languages differ depending on the
broadcast. “OTHER” is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
Note:
•
Pressing
[AUDIO
]
does not control external audio devices.
• The information display will automatically disappear in a
few seconds.
5
Sleep Timer
The sleep timer can be set to automatically turn off the unit after an
incremental period of time.
1
Press
[SLEEP
]
to set the sleep timer.
SLEEP OFF
• Sleep timer display appears on the TV screen.
2
Press
[SLEEP
]
repeatedly to change the amount of
time until shut off.
SLEEP 120MIN.
• You can set your unit to turn off after a set period of
time (from 30 to 120 minutes).
• Each press of
[SLEEP
]
will increase the time by 30
minutes.
• After setup, the sleep timer display can be called up
for checking by pressing
[SLEEP
]
.
To Cancel the Sleep Timer
Press
[SLEEP
]
repeatedly until “SLEEP OFF“ is
displayed on the TV screen.
Note:
• The sleep timer display will automatically disappear in a few
seconds.
• When you disconnect the unit from the AC outlet or when a
power failure occurs, the sleep timer setting will be canceled.
5
A84N0UH_LD195SL8_EN.indd 16
A84N0UH_LD195SL8_EN.indd 16
2008/01/17 17:22:46
2008/01/17 17:22:46
