Functional overview
Before you start
Recor
ding
Pla
ying discs
Editing
Bef
or
e y
ou star
t
Connections
Getting star
ted
Changing the SETUP men
u
Others
Español
7
Front Panel
1
.
POWER button
Press to turn the DVD recorder on and off.
If timer programmings have been set, press to
set the unit in timer-standby mode.
2
.
STOP
C
button
Press to stop play or recording.
3
.
REV
H
button
Press to skip to the previous chapter or track.
Press and hold for
1
.5 seconds to fast reverse.
4
.
PLAY
B
button
Press to start or resume play.
5
.
FWD
G
button
Press to skip to the next chapter or track.
Press and hold for
1
.5 seconds to fast forward.
6
.
CH
L
/
K
button
Press to change the channel up and down.
7
.
A
(OPEN/CLOSE) button
Press to open or close the disc tray.
8
.
Disc tray
Place a disc when open.
9
.
Display
Refer to “Guide to Displays on the front panel” on
page 12.
10
. Remote control sensor
Receive signals from your remote control so that you
can control the DVD recorder from a distance.
11
. REC SPEED button
Press to switch the recording speed.
12
. REC button
Press to start recording.
13
. AUDIO INPUT jacks (LINE2)
Use to connect external equipment with standard
audio cables.
14
. VIDEO INPUT jack (LINE2)
Use to connect external equipment with a standard
video cable.
15
. S-VIDEO INPUT jack (LINE2)
Use to connect the S-Video output of external equip-
ment with an S-Video cable.
Rear Panel
1
3
6
2
11
10 9
7
4
8
5
1
.
AC Power Cord
Connect to a standard AC outlet to supply power to this
unit.
2
.
AUDIO OUTPUT jacks
1
,
2
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
3
.
VIDEO OUTPUT jack
Use to connect a TV monitor, AV receiver or other
equipment with a standard video cable.
4
.
S-VIDEO OUTPUT jack
Use to connect the S-Video input of a TV monitor, AV
receiver or other equipment with an S-Video cable.
5
.
COMPONENT VIDEO OUTPUT jacks
Use to connect a TV monitor with component video
inputs with component video cables.
6
.
TV ANTENNA IN jack
Use to connect an antenna.
7
.
TV ANTENNA OUT jack
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
8
.
S-VIDEO INPUT jack(LINE
1
)
Use to connect the S-Video output of external equip-
ment with an S-Video cable.
9
.
VIDEO INPUT jack(LINE
1
)
Use to connect external equipment with a standard
video cable.
10
. AUDIO INPUT jacks(LINE
1
)
Use to connect external equipment with standard
audio cables.
11
. COAXIAL DIGITAL AUDIO OUTPUT jack
Use to connect an AV receiver, Dolby Digital decoder
or other equipment with a coaxial digital input with a
digital coaxial cable.
Note
•
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to
the DVD recorder.
•
This unit does not have the RF modulator.
1
2 3 4 5 6
7
12 11
8
9
10
15
13
14
E6501UD_DVR90DEA.qx3 04.3.17 16:27 Page 7