Sylvania 6900DTD Скачать руководство пользователя

Страница: 24 / 96

Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB.

Use a standard audio cable to connect the set of audio output jacks (L, R) on STB to the set of audio input

jacks (L, R) on the VCR.

NOTE:

If your VCR is monaural (MONO) and has only one audio jack, use a standard audio cable (white) to

connect the audio output jack (white) on STB to the audio input jack (white) on the VCR. The red cable

and jack will not be used.

Use a standard video cable to connect the video output jack on STB to the video input jack on the VCR.

Set the video resolution selection switch to “480i.”

NOTE:

No matter where the switch is, the video resolution with this connection will be always 480i.

For screen ratio and display mode, the settings in Setup menu will be effective.

For the capability of your TV and further information, refer to TV owner’s manual.

Use a standard video cable to connect the video output jack on the VCR to the video input jack on the TV.

Use a standard audio cable to connect the set of audio output jacks (L, R) on the VCR to the audio input

jacks (L, R) on the TV.

Plug all AC power cords into AC outlets, then turn all devices on.

Set the TV and VCR to input mode.

NOTE:

Refer to the owner’s manuals of the TV and the VCR for further information.

NOTE:

When using a standard video cable to connect, the resolution of the video signal output will always be 480i.

1A23

Connections

STB connection to TV and Video devices (VCR, DVD recorder, etc)

e.g.: Connection to VCR

Rear panel of STB

VCR

Audio cable

Video cable

Video
cable

Audio
cable

To video input
jack

To audio input
jacks (L, R)

NOTE:

Audio cables and video cables are not included.

ST201UB.qxd 04.3.9 4:04 PM Page 24

Содержание 6900DTD

































































































Результаты поиска

Содержание 6900DTD

Отзывы:

Похожие инструкции для 6900DTD

Бренды по названию

Популярные бренды

Sylvania 6900DTD, Руководство пользователя

Результаты поиска

Содержание 6900DTD

Отзывы:

Похожие инструкции для 6900DTD

Бренды по названию

Популярные бренды