22
EN
1A23
Connections
1
Use a standard antenna cable to connect the wall jack to the ANT. IN jack on STB.
2
Use a standard audio cable to connect the audio output jacks (L, R) on STB to the audio input jacks (L, R)
on the stereo.
3
Connect STB and the TV with a video cable.
NOTE:
Refer to the pages describing the connection to TV.
4
Set the video resolution selection switch to “1080i.”
NOTE:
For the capability of your TV and further information, refer to TV owner’s manual.
5
Plug the AC power cord of the stereo into the AC outlet, then turn the stereo on.
6
Set the stereo to the input mode to which you connected the audio from the STB.
NOTE:
Refer to the stereo owner's manual for further information.
7
Plug the AC power cord of STB into the AC outlet, then turn STB on.
STB connection to a standard stereo system
STEREO COMPONENT
Rear panel of STB
Audio cable
To audio input jacks
(L, R)
To component video input
jacks (Y/ Pb/ Pr)
Component video cable
NOTE:
Component video cable and audio cable are not included.
ST201UB.qxd 04.3.9 4:04 PM Page 22
