Sylvania 6319CCB, Руководство по обслуживанию, Страница: 77 / 108

DISASSEMBLY/ASSEMBLY PROCEDURES
OF DECK MECHANISM
Before following the procedures described below, be sure to remove the deck assembly from the cabinet. (Refer to
CABINET DISASSEMBLY INSTRUCTIONS on page 1-6-1.)
All the following procedures, including those for adjustment and replacement of parts, should be done in Eject mode;
see the positions of [42] and [43] in Fig. DM1 on page 2-4-3. When reassembling, follow the steps in reverse order.
STEP
/LOC.
No.
START-
ING
No.
PART
REMOVAL INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
[1] [1] Cassette Holder Assembly T DM3
[2] [1] Slider L T DM4 (S-1)
[3] [1] Slider R T DM4 (S-2)
[4] [3] Lock Lever T DM4 (S-3), *(P-1)
[5] [1] Cassette Plate T DM4
[6] [6] Cylinder Assembly T DM1, DM5
3(S-4), VH Connector
A and B,
Connector A and B
[7] [7] Loading Motor Assembly T DM1, DM6
2(S-5), (S-6), LDG
Belt, ACH Connector
AN(9P) and 9B
[8] [1] Tape Guide Assembly T DM1, DM7 *(P-2), (C-1)
[9] [9] Door Opener B T DM1, DM7 (S-7), *(L-1)
[10] [9] Pinch Arm (B) Assembly T DM1, DM7 *(P-3)
[11] [10] Pinch Arm (A) Assembly T DM1, DM7
[12] [12] FE Head T DM1, DM8 (S-8)
[13] [13] First Post Assembly T DM1, DM8 (S-9)
[14] [14] Prism T DM1, DM8 (S-10)
[15] [15] Standard Post T DM1, DM8 *(L-2)
[16] [1] Slider Shaft T DM9 (S-11), *(L-3)
[17] [16] C Drive Lever L T DM9
[18] [16] C Drive Lever R T DM9
[19] [19] Capstan Motor B DM2, DM10 3(S-12), Cap Belt
[20] [20] FF Arm Holder B DM2, DM11 (S-13)
[21] [20] Clutch Assembly B DM2, DM11 (C-2)
[22] [20] FF Arm B DM2, DM11
[23] [23] Cam Holder B DM2, DM12 (C-3)
[24] [23] Cam Gear (B) B DM2, DM12 (C-4), *(P-4)
[25] [25] Mode Gear B DM2, DM13 (C-5)
[26] [25] Mode Lever B DM2, DM13 (C-6)
[27] [26] Cam Gear (A) B DM2, DM13
[28] [27] Pully Assembly B DM2, DM13
[29] [28] Worm Holder B DM2, DM13 (S-14)
[30] [26] Sensor Gear B DM1, DM14 (C-7)
[31] [26] Idler Assembly B DM1, DM14
[32] [26] BT Arm B DM2, DM14 *(P-5)
2-4-1 Z10DA2H