Sylvania 6319CCB, Руководство по обслуживанию, Страница: 35 / 108

3) Countermeasure for TAPE LOADING Malfunction
Detect the Malfunction with the LOADING Switch.
a) TAPE LOADING Malfunction
If LD-SW does not go to the established position
after a lapse of 7 sec. or more from TAPE LOADING
or TAPE UNLOADING start, the LOADIONG func-
tion shall immediately be stopped and POWER be
turned OFF, and inform the Timer about the LOAD-
ING Mechanical Malfunction.
b) LD-SW Position Malfunction at each mode
When the unit operates at each mode, even if the
LD-SW position changes from the established one
in its mode, it keeps the function according to its
mode.
4) Countermeasure for CASSETTE LOADING Mal-
function
a) CASSETTE IN operating Malfunction
If LD-SW does not go to SB position after a lapse of
5 sec. or more from the CASSETTE insertion start,
the unit starts the CASSETTE OUT operation.
After switch over to CASSETTE OUT operation and
then a laps of 5 sec. or more from the CASSETTE
OUT operation start, if LD-SW does not go to the EJ
position or if START Sensor and END Sensor does
not turn "ON" at the EJ position, the unit starts again
to insert CASSETTE.
(However in S-INH state, the START/END Sensor
shall be disabled).
b) CASSETTE OUT operating Malfunction
After a lapse of 5 sec. or more from CASSETTE
OUT operation start, if LD-SW does not go to the EJ
position or if START Sensor and END Sensor does
not turn "ON" at the EJ position, the unit starts to
insert CASSETTE.
(However in S-INH state, the START/END Sensor
shall be disabled).
When the unit switches over to CASSETTE insertion
at CASSETTE IN or CASSETTE OUT Malfunction,
if LD-SW does not go to the SB position after a lapse
of 5 sec. or more from CASSETTE insertion start,
the function shall immediately be stopped and
POWER be turned OFF, and the unit be CASSETTE
LOADING Malfunction.
c) When POWER is turned ON, if the CL position or
GC position cannot be detected after 5 sec. LD-REV
operation and 5 sec. LD-FWD operation, the func-
tion shall immediately be stopped and POWER be
turned OFF, and the unit be CASSETTE LOADING
Malfunction.
d) When POWER is turned ON without CASSETTE
(EJ position) and LD-SW is monitored all the time,
if the CL or GC position is detected continuously for
1 sec. or more, the POWER shall be turned OFF and
the unit be CASSETTE LOADING Malfunction.
Countermeasure for Mechanical
Malfunction
If the unit detects Mechanical Malfunction, turn the
POWER OFF. If the unit is Mechanical Malfunction, Key
input except POWER key shall be disabled and CAS-
SETTE insertion disabled. When POWER Key is en-
tered, the POWER is turned ON and the unit switches
over the EJECT Mode. (Return with POWER ON)
1-8-14 T5200MTI