SYSTEM SETUP
15
◄
,
►
,
▲
,
▼
need to set or reset. Press the
OK
Button to enter or confirm the selection. After setting, press the SETUP Button to save the settings and exit.
Press and hold the SETUP Button, the setting menu will appear on the screen as below. During setting, using
Direction Buttons to select and highlight the function you
4. If TV type is selected, set the aspect ratio to match the connected TV.
TV System
POWER RESUME
Screen Saver
TV Type
Default
SYSTEM SETUP
1. If Tv System is selected, it can only be set to NTSC, PAL or AUTO to match the connected TV.
2. If POWER RESUME is selected, if set it On,the unit will start playback from the position where the disc was
stopped last time.
3. If Screen Saver is selected, if set to On, the screen saver will come on when the unit idles or the image is
paused for several minutes.
SY ST E M SE T U P:
7. If Default is selected and set it to restore, all settings will be restored to factory setting.
TFT
Rating
Password
password is "1111".
5. If Password is selected, press the button to highlight the , then press the MENU button four
times to unlock the rating, press OK button to confirm. Now the lock status will be .
(NOTE: MENU Button stands for "1", VOL+ for "2", VOL- for "3"), the default
►
6. If Password is selected, press the button to enter rating level, press or button to select the desired
►
rating level, then press OK button to confirm setting.
►
►
~ Rate levels:
1. KID SAFE: Kid safe
2. G: All ages
3. PG: Parental Guidance
4. PG 13: Parental Guidance less than 13 years old
5. PG-R: Under 17 years old, Parental Guidance suggested
6. R: Under 17 years old, Parental Guidance strongly
7. NC-17: 17 years old or above
8. Adult: Adult only
To change a new password, highlight the password and press the "VOL+" or "VOL-" four times during
unlocking status to set new passwaord to "2222" or "3333", then press OK button to confirm changing.
