ASSEMBLY INSTRUCTIONS
5
5. Insert upper middle section (B) of tree
into lower middle section (C).
6. Locate light set plug labeled #2 from
section (B) and connect to outlet labeled
#2 mounted in section (C).
C
5
E
D
B
C
6
E
D
2
3
B
The long extension cord should hang down through
section (D). Plug extension cord into wall outlet.
NOTE: This tree comes with an ON/OFF foot pedal
switch for convenience.
7. Insert top tree section (A) into upper middle
section (B). Locate light set plug labeled #1 in
section (A) and connect to end connector labeled
#1 hanging freely from section (B).
7
E
D
B
A
C
1
Gently pull all branches down and into place. When
adjusting branches, be sure that all wires are
free of branch hinges. Shape the branches. Starting
with tips closest to the pole, shape one tip to
the right, one to the left and one at the center of the
main stem. Repeat pattern for each branch.
Your pre-lit tree is now ready for decorating.
