Sylvac D200S, Руководство по эксплуатации

Страница: 84 / 112

84
E
.5 Checking of Frontal LED indicators
e ON permanently. If it is not
e case, switch OFF theD200S unit, wait 10 seconds and switch ON the unit again.
D Colour Description
3
After the complete installation, the "LED" power should b
th
LE
Power
green the D200S unit is connected to the sector and ready.
Activities USB
green Indicate that the data are received / transmitted via
USB connection.
Tolerances
global status < red Indicate that measurements are out of tolerance
(not re-workable)
Tolerances
global status = green Indicate that measurement are in tolerance (good)
Tolerances
global status > yellow Indicate that measurements are out of tolerance
(re-workable)
Note : The "LED" "Activities USB" flickers only when data are sent or received via the
USB connection, it does not flicker if via the RS232 cable.
nce that all is installed correctly, start the application. O
The following window appears:
The configurations introduced after the first use are saved to each exit of the
software, thus the user finds the program in the same status after each use.