26
10. Getting Started
Disconnect the heater from the power supply before attaching the wheel stand. The floor stand may leave
scratches on sensitive surfaces.
a) Attach Floor Stand
• Turn the heater upside
down and gently place
it onto a flat level
surface.
• Use a cross-head
screwdriver to fasten
each stand. Use the
included screws as
shown.
b) Inserting Battery
Insert a CR2025 battery into the battery compartment as indicated on the back of the remote control.
If the remote control stops being responsive and you are within range (5 m) of the heater, you may need to
replace the battery.
11. Operation
When using the heater for the first time, hot parts of the casing may cause an unpleasant odour. This is
normal. In this case ventilate the room in which the product is installed.
a) Main Power Switch
• Flip the main power switch
(10)
to the ON position, it will light up to indicate the heater is receiving power.
• A beep will then sound, and the heater will enter “standby mode”.
b) Heating ON / Standby Mode
• On the heater press the power button
to start heating or press it again to return to standby mode (stop
heating).
- The
icon will show on the LCD display
(8)
to indicate the heater is active.
- The LCD display will also indicate the current temperature.
