24
8. Safety Equipment
Overheat Protection
The heater is equipped with overheat protection that cuts the power when triggered. Immediately remove anything
covering the heater (if applicable), switch the power OFF, then disconnect the heater from the power supply. Wait until
the heater has cooled down sufficiently before switching the power back on ON.
If the heater will not switch ON after cooling down, it may have been damaged from excessive heat. Switch
the power OFF, disconnect from the power supply, and contact our technical support service or other
technical personnel.
Tip-Over Switch
The heater switches OFF if the heater tips-over or is tilted beyond a safe angle. Return the heater to the normal upright
position to resume normal function.
9. Operating Elements
a) Remote Control
This has a range of approximately 5m.
°C
1
2
3
4
5
1
Power button (ON / Standby mode)
2
Adjust heating level button (low, medium, high)
3
Timer adjust button
(down / up)
4
°C
Temperature adjust button
(down / up)
5 Battery compartment (on reverse side)
