•
Maintenance, modifications and repairs must be carried out by a technician or
a specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Always observe the safety information and operating instructions of any other
devices which are connected to the product.
c) Electrical safety
• Before connecting the product to the mains, check that your local AC mains
voltage matches the specifications on the type plate.
• This product is built according to protection class I. It must only be connected to
an earthed mains socket.
•
Never pour liquids over electrical devices or place objects filled with liquid next
to the device. If liquid or an object does get inside the device, power down the
respective socket (e.g. switch off the circuit breaker), and then remove the mains
plug from the mains socket. Discontinue use and take the product to a specialist
repair centre.
• Never use the product immediately after it has been taken from a cold room into
to a warm one. This may cause condensation to form, which can destroy the
product. Allow the product to reach room temperature before connecting it and
putting it into use. This may take several hours.
• The mains socket must be located near to the device and be easily accessible.
• Never unplug the mains plug by pulling on the cable. Always use the grips on
the plug.
• Always pull the mains plug out of the mains socket if the device is not going to be
used for longer periods of time.
• For safety reasons, unplug the mains plug from the mains socket during
thunderstorms.
• Ensure that the mains cable is not squeezed, bent, damaged by sharp edges
or subjected to mechanical stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the mains cable. Failure to adhere
to these instructions may lead to damage of the mains cable. A damaged mains
cable can cause a fatal electric shock.
• Do not touch the power cord if there are any signs of damage. Power down
the respective mains socket (e.g. via the respective circuit breaker), and then
carefully unplug the mains plug from the mains socket. Never use the product if
the mains cable is damaged.
• Damaged mains cables must be replaced by the manufacturer, an authorised
repair centre or a qualified electrician.
• Never plug in or unplug the mains plug when your hands are wet.
• Each socket on the power strip is equipped with enhanced contact protection.
Only when the prongs of a power plug are placed in both openings of a socket at
the same time will the protective mechanism release the opening. Nevertheless,
take special caution when children are around. Children do not understand the
hazards associated with the incorrect use of electrical devices. There is a risk of
fatal electric shock!
• Do not overload the socket strip. Pay attention to the maximum permitted total
power consumption of all connected loads in ‘Technical data’.
• Completely unwind the mains cable before use. The power cable must not be
pinched or damaged by contact with sharp edges. Do not place any objects on
the cord, and do not allow it to become kinked. Place the mains cable away from
open spaces where it will not present a trip hazard. The mains plug must be
easily accessible. Do not install the mains cable under carpets or the like.
• The socket strip and the connection cable will become warm when there is a high
connected load. This constitutes a fire hazard!
• Do not connect any other socket strips or other power distribution devices to the
product. This can lead to an overload! This constitutes a fire hazard!
• Insert the mains plug of the socket strip into a wall socket.
• The power strip is only fully isolated from the mains when the plug has been
unplugged!
• Only use the product in temperate climates. It is not suitable for use in tropical
climates.
• Do not connect in series!
• Do not operate while covered!
• Only use in dry rooms.
Operating instructions
Power strip
Item no. 1574789
Item no. 1732743
Item no. 2446231
Item no. 2445488
Item no. 2445489
Item no. 2445490
Item no. 2445491
Item no. 2445492
Item no. 2445493
Item no. 2445494
Item no. 2445495
Item no. 2445496
Item no. 2445497
Item no. 2445498
Item no. 2445499
Item no. 2445500
Item no. 2445501
Item no. 2445502
Item no. 2445503
Item no. 2445504
Intended use
The power strip provides additional mains sockets with protective earth contacts, which can be
used to connect electrical devices. The 45° position of the sockets also allows angled plugs
to be used.
If the power strip has a switch (see ‘Technical data’), you can use it to switch all connected
consumers on or off.
The connection data and the maximum permitted total power consumption of all connected
loads can be found in ‘Technical data’.
This product may only be used in dry, enclosed indoor spaces. Do not use it outdoors. Contact
with moisture (e.g. in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as short circuit, fire or electric shock. Read the operating
instructions carefully and store them in a safe place. Only make this product available to third
parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names contained herein are trademarks of their respective owners. All rights reserved.
Delivery content
• Power strip
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Description of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g., due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet, as this may cause a fatal electric shock!
Safety instructions
Read the operating instructions carefully and observe in particular the safety
instructions. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. It may become
a dangerous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.