Sybaritic Dermalife RelaxWell Ocean Pod, Руководство пользователя

Страница: 79 / 86

Section 11 Maintenance and Reinstallation
RelaxWell Ocean Pod 74
11.6 Cleaning the Aroma Diffusion System
11.6.1: Aroma System Flushing
Recommended to be completed nightly:
1. Turn the system on by pressing the On/Off button located at right side of head of
system.
2. Press Enter on the LCD panel to continue.
3. Enter the service menu by using the directional arrows until Service feature is
highlighted.
4. Scroll down to Aroma Cup feature until highlighted.
5. Press the right arrow key to open the Aroma Cup feature. You may hear a faint
clicking sound as drainage opens.
6. All access aroma liquid from the tank will drain from the nipple at the foot end of
the unit. Ensure that the excess aroma liquid is flowing from the nipple into drain
pan before continuing to step 7.
7. Pour 4 ounces hot water into the aroma tank reservoir to remove any extra
aroma liquid. This water will immediately drain from blue nipple underneath the
bed, check to ensure it is draining out appropriately into drainage pan.
Note: This process can be completed with tap water.
11.7 Cleaning the System Drain (Located under the upper vibratory
bed)
Recommended to be completed nightly:
1. Carefully unplug the upper and lower vibration beds. The plugs must be
unlocked counterclockwise before removing male from female connectors.
2. Remove the bed section and set off to the side of the machine.
3. Use Accel disinfectant and dry towel to wipe the drain clean. A small, soft brush
(i.e. a nail brush) may be helpful.
4. Place a catch pan under the nipple under the foot end of the unit.
5. Pour a half-gallon of hot tap water down the drain to flush it out.
6. Reinstall the upper and lower vibration beds by placing the molded bed supports
onto the bed balls. Gently replace and relock the vibration bed connectors.
Note: Tap water can be used for this process & an ounce of Accel solution can
be added to the water if so desired.