Sybaritic Dermalife RelaxWell Ocean Pod, Руководство пользователя

Страница: 59 / 86

Section 8 Service (Hood)
RelaxWell Ocean Pod 54
8.11 Replacing Parts in the LCD Housing
Face Fan

Required tools: crosshead screwdriver

Remove the connector “FAN” from the “LCDrb” PCB.

Remove four (4) screws that hold the fan in position.
LCD Panel

Required tools: crosshead screwdriver, knife, silicon glue

Removal:
a.
Remove all connectors from the “LCDrb” PCB.
b.
Remove two screws from the “LCDrb” PCB and take off “LCDrb” PCB.
c. Cut glue in edges of LCD panel.
d. Remove two screws from LCD mounting bracket and carefully remove
LCD display from housing.

Installation:
a. Put LCD panel into position and put some glue drops at the bottom
corners.
b. Install the two (2) screws into the LCD mounting bracket.
c.
Put “LCDrb” PCB into position and install two (2) screws.
d. Install all connections.
NOTE : There is no difference between control panel 1 and control panel 2 (connections
KBD1 and KBD2).