
SY-3A-40W
www.sy.co.uk
Setting
Up / Down Buttons Control:
MIC
Volume of the MIC / LINE input
LINE
Volume of the selected LINE input
BASS
Bass response of the output
TREBLE
Treble response of the output
The MUTE button turns off the output when its LED is lit.
Using IR Remote Controls
Connect the IR sensor to the IR socket and place the detector in sight of the remote control keypad. The
keypad controls the same amplifier functions as the front panel buttons:
Button
Function
Input Select 1
Selects line input 1
Input Select 2
Selects line input 2
Input Select 3
Selects line input 3
Mic Mute
Mutes the MIC / LINE input
Line Mute
Mutes the selected line input signal
Speaker
Unmutes both the MIC / LINE and the selected line input.
MIC+ & MIC-
Increase or decrease the MMIC / LINE input volume
LINE+ & LINE-
Increase or decrease the selected line input volume
BASS+ & BASS-
Increase or decrease the bass response
& TREBLE-
Increase or decrease the treble response
RS232 Control Commands
The following RS232 commands provide control of the SY-HD-S41 from a PC, laptop or programmable
control panel. The RS232 settings are: 9600 baud, 8 bits, no parity, and 1 stop bit.
All response values given in the following table are examples only. The actual response values will reflect
the changes that the transmitted RS232 command has just made.
Numerical values for the direct setting commands are in decimal only.
Action
Command
Response
Select Line input 1
1A1.
A: 1 -> 1
Select Line input 2
2A1.
A: 2 -> 1
Select Line input 3
3A1.
A: 3 -> 1
Mute MIC / LINE input and Line Out
0A0.
Mute Audio
Mute MIC / LINE input only
1A0.
Mute MIC
Mute Line Out only
2A0.
Mute LINE
Turn all audio output on
0A1.
Unmute Audio