SY HDBT-662, Руководство пользователя, Страница: 6 / 12

sy.uk 6 V1.0
Default EDID Settings
The following values are permitted for the
y
value in the
SET INx EDID y
and
SET INx EDID
y
commands.
Y value IN1 – 4 (HDM1 – HDMI4I) / IN5 (DisplayPort) IN6 (VGA)
0 1080P 2Ch audio (PCM) VGA 1080p
1 1080P 6Ch audio USER1 EDID Memory
2 1080P 8Ch audio USER2 EDID Memory
3 1080P 3D 2Ch audio (PCM) USER3 EDID Memory
4 1080P 3D 6Ch audio Not valid
5
1080P 3D 8Ch audio Not valid
6 4K 30Hz 3D 2Ch audio (PCM) Not valid
7 4K 30Hz 3D 6Ch audio Not valid
8 4K 30Hz 3D 8Ch audio Not valid
9 4K 60Hz (Y420) 3D 2Ch audio (PCM) Not valid
10 4K 60Hz (Y420) 3D 6Ch audio Not valid
11 4K 60Hz (Y420) 3D 8Ch audio Not valid
12 1080P 2Ch audio (PCM) HDR Not valid
13 1080P 6Ch audio HDR Not valid
14 1080P 8Ch audio HDR Not valid
15 1080P 3D 2Ch audio (PCM) HDR Not valid
16
1080P 3D 6Ch audio HDR Not valid
17 1080P 3D 8Ch audio HDR Not valid
18 4K 30Hz 3D 2Ch audio (PCM) HDR Not valid
19 4K 30Hz 3D 6Ch audio HDR Not valid
20 4K 30Hz 3D 8Ch audio HDR Not valid
21 4K 60Hz (Y420) 3D 2Ch audio (PCM) HDR Not valid
22 4K 60Hz (Y420) 3D 6Ch audio HDR Not valid
23
4K 60Hz (Y420) 3D 8Ch audio HDR Not valid
24 USER1 EDID memory Not valid
25
USER2 EDID Memory Not valid
26 USER3 EDID Memory Not valid
RS232-CTL to Remote HDBT Commands
Command Description
SET SEPM x EN/DIS
Set data (8bit, no parity, 1 stop) Baud rate, and Enable or Disable
RS232 communications
x is: 0 = 57600 1 = 1200 2 = 2400 3 = 4800 4 =
9600
5 = 14400 6 = 19200 7 = 38400 8 = 56000 9 =
115200
GET SEPM Get RS232 Enable/Disable state
SET BPSEL HDBTx
Set HDBaseT output x to the RS232_CTL port for RS232 pass
through
Where x is: 1 – 3 for Zone 1 HDBaseT outputs 1 to 3, or
4 – 6 for Zone 2 HDBaseT outputs 1 to 3
GET BPSEL HDBT
Get the current HDBaseT output that is set for RS232 pass-
through