8
V2.4
Video Settings
The following table gives the commands for video selection and various other video options:
Command
Description
SET OUTx VS INy
Set output
x
to input
y
SET OUTx HDCPy
Set the HDCP status for output
x
, where
y
is:
0 = AUTO
1 = BYPASS
2 = Disable
3 = HDCP 1.4 mode
4 = HDCP 2.2 mode
SET OUTx VIDEO0
Set output
x
to auto scaling mode. If
x
= 0, then apply to all
outputs
SET OUTx VIDEO1
Set output
x
to bypass mode. If
x
= 0, then apply to all
outputs
SET OUTx VIDEO2
Set output
x
to 4K to 1080p scaling mode. If
x
= 0, then
apply to all outputs
SET OUTx VIDEO3
Set output
x
to 1080p to 4K scaling mode. If
x
= 0, then
apply to all outputs
SET OUTx VIDEO4
Set output
x
to HDBT C scaling mode. If
x
= 0, then apply to
all outputs
SET OUTx IMAGE ENH 0
Set 1080p to 4K video enhancement mode to bypass
SET OUTx IMAGE ENH 1
Set 1080p to 4K video enhancement mode to weak
SET OUTx IMAGE ENH 2
Set 1080p to 4K video enhancement mode to medium
SET OUTx IMAGE ENH 3
Set 1080p to 4K video enhancement mode to strong
GET OUTx VS
Get the video selection for output
x
(use
x
= 0 to get all
output selections)
GET OUTx HDCP
Get the HDCP status for output
x
(use
x
= 0 to get all output
selections)
GET OUTx VIDEO
Get the video scaler mode for output
x
(use
x
= 0 to get all
output scaler selections)
Audio Settings
The following two commands provide an analogue audio mute function only when the analogue
de-embedded audio outputs are being used. This mute function does not affect the embedded
HDMI output in any way.
Command
Description
SET OUTx EXA EN
Enable analogue audio de-embedding for output
x
(Mute Off)
SET OUTx EXA DIS
Disable analogue audio de-embedding for output
x
(Mute On)
