Swyx SX2 DualPRI V2, Быстрый старт

Страница: 6 / 7

Q U I C K S T A R T
SX2 DualPRI V2
6
SX2 DualPRI V2
PCM bus connection
The SX2 DualPRI V2 has two 20-pole jacks for connection with an optional PCM cable.
The upper jack is the output. The lower jack is the input. Connect the SX2 cards with the
PCM cable, by connecting the output jack of one card to the input jack of another card.
LED Status Display
Each E1 connection of the SX2 DualPRI V2 has a status display consisting of two red and
two green LEDs.
PCM input PCM output
The following assignments are valid:
This is how you install the ISDN cards in your PC
1. Turn off your PC and pull the respective mains plug out of the socket.
2. Open your PC.
3. Remove the screw from the metal panel covering a free PCI (expansion) slot:
Image 1-2 Removing the Metal Panel
4. Insert the ISDN PC card into a free PCI or PCI-X plug-in slot.
5. Use the screw you just removed to secure the PC card.
LED LED Statement
1 off Layer 1 deactivated
1 red glowing Layer 1 activated
2 green glowing Layer 2 activated
3 green, blinking At least one connection is active
4 red, blinking The line is being configured
Metal Panel
Expansion Slot
ISA
16-bit Expansion Slot
PCI /PCI-X
slot
Case
Back