Q U I C K S T A R T
SX2 DualPRI V2
4
SX2 DualPRI V2
SwyxStandby support
The card supports the SwyxWare option pack SwyxStandby.
In order to activate this function on the SX2 DualPRI V2, please make sure that the six-pole
jumper is inserted between the two ISDN connections; if this jumper is not present, the card
cannot support the standby option.
For information on configuring the SX2 DualPRI V2 before insertion, so that the existing
relay can be used, please refer to the SwyxWare documentation.
Jumper to support SwyxStandby.
Configuration of the Interrupt assignment
In the middle of the SX2 DualPRI is a three-pole jumper field.
Make sure that the plug is in the left position. It is thereby ensured that separate interrupts
are applied, as required in the driver software.
Jumper field for the interrupt assignment
