Swyx SwyxConnect 1722, Руководство пользователя

Страница: 91 / 112

Which information is required? 7-3
Please refer to chapter ’Linking two networks’
→
page 39 for advice
about the other values required for the installation of a RAS access.
7.1.2 Settings for TCP/IP
Each active RAS user must be assigned an IP address when using the
TCP/IP protocol.
This IP address can be permanently assigned when setting up a user.
However, it is simpler to let the SwyxConnect automatically assign
free IP addresses to users when they dial in. In this case you only
need to specify the IP address range that the SwyxConnect should use
for RAS users.
During both manual and automatic IP address assignment, please
ensure that only free addresses from the address range of your local
network are used. In our example, the IP address '10.0.1.101' will be
assigned to the PC when connecting.
This IP address makes the computer a fully-fledged member of the
LAN: with the appropriate rights, it can access all of the other devices
in the LAN. The same applies in the other direction as well:
computers in the LAN will also be able to access the remote machine.
The ISDN calling line identity (CLI)
The ISDN caller ID—also known as CLI ( C alling L ine I dentity)—this is the
telephone number of the caller which is transmitted to the participant receiving the
call. As a rule, it consists of the country and area codes and an MSN.
The CLI is well-suited for authentication purposes for two reasons: it is very
difficult to manipulate, and the number is transferred free of charge via the ISDN
control channel (D-channel).
10.0.
1
.100
(0123) 123456
User: 'SAMPLE'
(0123) 777888
ISDN adapter
Remote
workstation
IP: 10.0.
1.101
LAN of the head
office. IP: 10.0. 1.0
VPN or ISDN
connection