SWP Stealth-XG 6044, Руководство оператора

Страница: 2 / 32

2
1. INTRODUCTION
Respirator system is intended to be used to provide protection when the user working in
the contamination environment. The equipment is able to filter the contaminate air via
the filter build in to the blower and then supply fresh air from breathing tube to the
welding faceshield, so that the user can continually working in contamination
environment. It is a combined face and breathing protection device for increased safety
and comfort during welding. Please read these instructions carefully before unpacking.
For proper use, see user instructions or contact manufacturers for help.
2. APPROVALS
The system complies with the requirements of PPE Regulation 2016/425 and
European Standard EN 12941: 1998+A2:2008 class TH3 P R S L . The respirator
system is designed to provide a supply of filtered air via a breathing tube to a welding
headpiece. The equipment can be used in environment that requires a class TH3P
breathing protection device. It protects against articulate contamination.
All components used in respirator system must be manufacturer approved parts, and
must be used in accordance with the instructions in this manual.
1. The approval is not valid if the product is incorrectly used together
with non-approved parts or components.
2. Only the particle filter and pre-filter can be used together with this
system. Filters fromother manufacturers should under no circumstances
be used.
PAPR PRECAUTIONS
Notified Body: Vyzkumny ustav bezpecnosti prace, v. v. i., Jeruzalémská 1283/9, 11
0 00 Praha 1, Czech Republic (Notified body number 1024)