Operating Instructions
www.snopakebrands.com
The POWER light does not glow when the laminator is turned on.
Please make sure the plug is properly plugged into the power socket.
The pouch cannot be laminated.
Please check the thickness of the lamination pouch. The total thickness cannot exceed
1.0mm.
The pouch cannot be laminated thoroughly, white spots appear on the pouch.
The speed of the laminator is too fast. Select a setting for thicker pouch or paper type.
The pouch becomes creased and wavy.
The speed of the laminator is too slow. Select a setting for thinner pouch or paper type.
The sides of the pouch are wavy.
Did you laminate a large number of small pouches? Wait for 2 minutes and laminate again.
The pouch is jammed inside the laminator.
Press the Roller Reverse button and pull out the pouch gently. If the jammed pouch cannot
be removed, turn off the laminator immediately and contact your retailer for assistance.
The laminator shuts down after about 30 mins operation.
This is normal. To restart, toggle the on/off button.
Should problems persist, please contact your supplier for assistance.
Troubleshooting
11
