SWL for Yaesu FRG-8800, Руководство по эксплуатации

Страница: 9 / 11

9
Copyright © 2003, 2004, 2005 by swl-remotes.com,
All rights reserved.
LED Operation
The LED provides feedback on the mode and operation of the SWL IR Remote.
Communications Error
Because the FRG-8800 communications is unidirectional, there is no status or response from the
receiver. The LED will never slow blink.
Clear Input
After the Mute is used to clear key entries the LED will blink twice.
Confirmation of Command
After a valid command has been issued the LED will blink once and go out. The LED will
appear to be on continuously when the
CH+/- is held because the commands repeat and the LED
doesn’t always time out.
Configuration Mode
When you enter the parameter configuration mode, the LED will blink continuously at a fast rate
until the configuration operation is completed or canceled.