35
Operating the Walkie−Talkies
61
Confirmation signal (Roger beep)
The confirmation signal is issued on releasing the
P
button. This signals to the
caller that you have ended transmission.
Activating/Deactivating the confirmation signal
9 x
M
Activate the programming mode
/
,
P
Select ON / OF and confirm it
Key tone on/off
10 x
M
Activate the programming mode
/
,
P
Select ON / OF and confirm it
Dual channel monitoring
It is possible to monitor a second channel with CTCSS/DCS code in addition to the
currently set channel with CTCSS/DCS code.
Activating dual channel monitoring
11 x
M
Select dual channel monitoring
/
,
M
Select the 2nd channel and confirm it
/
,
M
Select the CTCSS code for the 2nd channel and
confirm it
/
,
M
Select the DCS code for the 2nd channel and
confirm it
Both channels are scanned for signals. If an active channel is detected, the dual
channel scan stops. Channel scanning is resumed when no signal has been trans-
mitted on the channel for five seconds.
Press the
P
button to enable radio communication on this channel.
Deactivating dual channel monitoring
11 x
M
Select dual channel monitoring
/
[
OF
]
,
P
Deactivate dual channel monitoring
Содержание WTF732
Страница 67: ...Notes 67 Notes ...
