32
33
34
Operating the Walkie−Talkies
60
4
Operating the Walkie−Talkies
Display and notation of operating sequences
Press the button displayed
,
Press and hold the button displayed
,
Release the button displayed
y
Display indicator
Speak into the microphone
Switching the walkie−talkie on/off
Switch the walkie−talkie on
An acoustic signal is issued. The current channel setting
appears in the display and the Ready LED flashes.
Switch the walkie−talkie off
Volume control
V
Increase (+) or decrease (−) the
volume
Transmitting and receiving
Transmitting
After pressing the
button, the Ready LED lights up.
If the
button is pressed longer than 60 seconds, a warning si-
gnal is issued. Transmission is interrupted.
,
,
Transmit
Hold the walkie−talkie approx. 5 to 7 cm from your mouth
and speak at a normal volume. In order to talk to other sub-
scribers, the respective walkie−talkies must be set to the
same channel and CTCSS code.
Receiving
,
Receive
Radio signals cannot be received when the
button
is being pressed.
