49
Operating the Walkie−Talkies
81
Adding/Excluding a channel in the channel group
8 x
M
X
/
Y
,
P
Add or exclude the output channel
for the channel group using
ON / OFF and confirm it
Start/End channel scanning
The menu item is only available when ON" is selected
for specific channel scanning.
Resuming channel scanning
X
or
Y
Resume channel scanning
Excluding a channel
If a channel found during the channel scanning process should
not be considered for subsequent use, it can be excluded. Press
and hold the
X
/
Y
button for 3 seconds.
All the channels are taken into consideration again when a new
channel scan is started.
a
3 sec.
X
or
Y
The channel is excluded and
channel scanning automatically
resumed
Transmitting the ringing tone
The ringing tones indicate to other subscribers that you want to
talk to them. A condition for this is that the other subscribers are
using the same channel and CTCSS code.
C
Send the ringing tone
a
C
The ringing tone is sent max. 10
times
Selecting/Deactivating ringing tones
There are 10 different ringing tones available for selection. To
deactivate the ringing tone, select the setting 0 (zero).
The menu position can vary. This depends on the
selection you have chosen;
